Secret codes for Chinese Mobiles:
After a lots of request of users, now I publish the secret codes for most type of china brands mobile phone. Nokia N-Series: N95, N93, N73, N93I, N83, N8800, and more available in Chinese models. They have features like touchscreen, two camera, 2 SIM slot, two battery, two charger, and some of other features. Most Chinese phones have same software and features, but have different in looks. These phone have a range of under 2k-8k (INR). Sony Ericsson phones also avaliable in Chinese models and soon will here.
China Mobile Secret Codes and Pinout:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#0084#call
*******************************************
N95Pda and N95S Pinout
2×5
4:Rx
5:TX
6:GND
---------------------
K1 Moto Pinout
4:Rx
5:Tx
6:Gnd
---------------------
PDA ZT6618
1..8 pin mini Conector
3:Rx
4:TX
5:Gnd
--------------------
Cect 8380
1..8 pin mini Conector
1:Gnd
2:Rx
3:Tx
---------------------
KG-200
4:Gnd
3:Tx
2:Rx
----------------------
N91I
1...12 pin Connector
.
5:Gnd . 12:Tx
6:Tx . 13:Rx
7:Rx .
Replies:
Sigmatel s90 GPRS
hi..
I am Rohit Yaduwanshi from Bhopal, India.Recently,i have purchased china mobile model sigmatel s90 and i use airtel connection in this.yesterday i activate GPRS on my number,but i cannot access GPRS in my cell.Then i talk to airtel customer care regarding this problem and then he said that i need settings of china mobile model sigmatel s90 to run GPRS.
So pls send me settings of china mobile N95 to run GPRS.
Thanks in advance
I require guidance.....
Dear Sir,
I am started using a Simoco 1104 phone which has close resemblace with chinese mobiles so far as os is concerned. Can you guide me 1. w2here from can I have different softwares for it? 2. Whatfile extnsn type software will work in it? 3. How can I have a backup of phonebook in my pc? 4. Which are the website wherefrom I can get the softwares for it?
I am eagerly looking for your reply.
question
I have SIGMATEL FXD S45 mobile dual sim ,and it doesnt display incoming numbers. pls tell how to rectify this problem and if any setting code is available for this problem please reply.
mobile software
no
CAmera Module not ready Errror
hello.
is there any code to repair the sigmatel s30 model of the china mobile.
the phone is when switched to camera mode it shows camera module not ready.
can any one say me what to do. what is its solution..........?????
Plz revert me back ...on my mailing address on kushal.kanal@gmail.com
thanks
Sigmatel FXD S400 Camera & Video Camera not working.
Yesterday purchased Sigmatel FXD S400. When going to Camera mode it displays "Camera Module not ready" both in Camera and Video camera options. Please help me.
thanks.
How to slove my S4 problem (high speed sim)
Dear Sir,
I have S4 Sigmatel Mobile & i set it on high speed SIM & mobile reset in 3 sec. After that i can not switch on my mobile again. Now what to do. Please solve my problem as soon as possible.
S4 Sigmatel locked.
i have entered high speed sim option engineering mode in s4 sigmatel china mobile phone does not power on
china mobile E71"camera module not ready" pls help me
hello dear
hw r u ?
my nokia e71 copy in china camera not working Error-camera module not ready" pls help me dear.....as soon as possible...
thanx a lot dear im waiting ur reply
thanx again
Pankaj setia
dist. sri ganganagar
9785236090
9887750000
pls help me dear-camera module not ready chaina e71
hiiiii
but i try this*####, *###, ####*,###*
no solutions 4 these codes
pls help me-----------nokia E71 copy in china mobile
i m waiting dear
bye
gprs manual settings for china mobile NKTEL-2008 in Airtel sim
Sir,
Please inform me step by step manual settings for gprs/internet connection in
NKTEL-2008 mobile set on Airtel sim.
Thanking You,
sunny
step by step manual gprs settings for nktel-2008
Sir,
Please inform me step by step manual settings for gprs/internet connection in china mobile
NKTEL-2008 in Airtel sim.
Thanking You,
sunny
I have SIGMATEL FXD S45
I have SIGMATEL FXD S45 mobile dual sim ,and it doesnt display incoming numbers. pls tell how to rectify this problem and if any setting code is available for this problem please reply.
Install Games
How to Install games in Chiness Mobile, coz I try to copy in memory card and then I insert in mobile but cannot install. please help me...
Engineer mode mobil G10+
Hi, I'm from Colombia. I have a mobil G10 +, I need the code for Engineer mode (#*__ __ __ #?).
You can help me?
Urgent Remedy Reqd.
Dear Friends,
By mistake I turned on the "High Speed Sim" option in the Engineer Mode of my China Mobile Sigmatel T99i. Immediately the power went off and again it is not coming out. Something like totally dead.
I am bit worried. Please someone tell me the remedy as how to restart the phone. Matter is very urgent pl. I will be greatful if someone helps me immediately.
Thanks.
Siva
Xp 898
Hi Dears,
I have xp898 china mobile... please send anyone reset factory code... i was tried many codes but they are still not working...
plz plz plz plz any one help me... send the code on my email address
malikhass@gmail.com
dual sim phone sim a working but sim b say sim access error
what can be done to fix that problem when sim not in sim b it asks for the sim b sim
n93i Clone Help
Good afternoon,
I purchased a fairly good quality n93i clone phone with 'DV' on the screen. I did not get a user manual, but I have worked out a lot for myself. I do however have a couple of issues:
1. I am not sure what the 'native' screen resolution is. I have sent some photos to be used as backgrounds, however, they do not 'stretch' to the full size of the screen (QVGA). Can anybody tell me what to resize to?
2. The phone has very limited memory, so I purchased a memory card for it, however, with things such as the display issue I mentioned above, it will not read an image from the memory card.
Can anybody help me with these issues?
Thanks
Andrew.
I ha ve a NKTEL Nseris 2008
I ha ve a NKTEL Nseris 2008 phone. The problem is that I am not able to download '.nes' games to my phone.The EMU folder is not appearing in the 'Fun and Games' folder.Please help me.
NKTEL Nseries 2008 game downloading problem
I have a NKTEL Nseries phone.The problem is that I am not able to download ' .nes ' games to my phone as the 'EMU' folder is not appearing in 'Fun and Games'. Please help me.
chinese nokia e71
i have purchase nokia e71 but ihave recieve call mobile back light always on
please tell me solution
rajesh_arora77@yahoo.com
my chinese 5700 mobile fell
my chinese 5700 mobile fell down and its not switched on please help me. i also knowing mobile repairing but this i can't solve this problem. please help.
unbale to calibrate screen on ChangJiang A968
Hi,
My ChangJiang A968 mobile won't come out of the calibation screen, the targets come up and when I press on them they move around, I think it have gone into some kind of a loop as I am unable to get any further than this screen, has anyone got any idea of what is wrong.
internet help
i need internet settings on my chinese blackberry from in the caribbean
some Mtk chines dual sim
when i has switched off the flight mode, my phone is restarting again and again... can you help me?
my mobile does not recognise the sim card
I have purchased a Sigmatel FXD S30 mobile phone from India times shopping. I am having a problem with the sim card insertion. After I insert the sim card the mobile is not recognising the same, I have followed the below procedure
1. Charged the Batteries
2. Opened the back cover and removed the battery
3. Inserted the sim card in Sim 1
4. Put back the battery
5. Switched on the mobile
6. Went to Settings and Dual sim and clicked on the the Sim 1
But still the mobile is not recognising the sim and it is asking '''' insert sim'''' please help
sigmatel s86
hi, need help?
having s86 model sigmatel phone.
1).i dont hav drivers to connect with pc.
2). how to download games & other browser like OPERA, UCWEB/BOLT.
PLZ, HELP ME.
CAN CALL ME 9814249333. PLZ WAITING .
*### is nt working
cam module is not working for my mobile( chaina n95 model). i tryed with *### but its not able to get factory settings. can anybody help me to rectify this problem.
FM IS NOT WORKING
Dear All
requesting all of u plz send me the solution , I have a chinese Mobile "LX mobile " when i starting FM its switch off and restart after a 3 or 4 seconds and searching for network But FM is not working kindly help!
Post new comment